Samsung galaxy s4 flashing original firmware. Firmware for Samsung Galaxy S4

Please note that these instructions are mostly intended for more experienced users. Therefore, beginners can also take risks, but you will still be responsible for the consequences yourself.

The new update file for your device is version I9500XXUFNB3 Android 4.4.2 KitKat, and the build date of this firmware is February 13, 2014.

If you still want to take the risk and manually update your smartphone rather than wait for an OTA update notification, then you can use the guide below. First, read some information to prepare for flashing:

  • Use the instructions only for the Galaxy S4 GT-I9500 model;
  • Do not try to update any other smartphone with this firmware;
  • Galaxy S4 GT-I9505 LTE will also receive an official update soon, so stay tuned for our news;
  • Make sure you have downloaded and installed the official Samsung USB drivers on your computer;
  • Disable the Samsung Kies program on your computer, as it will block manual flashing;
  • You will need the Odin program if you were unable to update your Galaxy S4 using Kies;
  • Disable any anti-virus software while flashing your smartphone;
  • Enable USB debugging in the Galaxy S4 settings. To do this, you must open the developer settings options: open Settings/…/About device, find the build number and tap on this line 7 times. Then enable USB debugging.
  • If your smartphone is flashed with custom firmware, then you will have to completely erase the system partition;
  • If your Galaxy S4 is 100% stock, then you don’t have to worry about losing information;
  • Before installing new firmware, remove the MicroSD card from the Galaxy S4;
  • Just in case, back up data from installed applications, SMS and other data using Helium for Android or any other similar software;
  • Sync contacts and data with your default Google account;
  • Check your phone's battery charge and make sure that the battery is at least 50% charged so that the phone does not turn off in the middle of the installation process;
  • This guide is intended for advanced users, but in any case we are not responsible for all consequences, be it the loss of personal data or the smartphone getting bricked.

I think this is enough to get you ready to install the official Android 4.4.2 reset on your Galaxy S4 GT-I9500.

Instructions: how to flash Galaxy S4 GT-I9500 with official Android 4.4.2 KitKat firmware:

  • Download the I9500XXUFNB3 firmware file from this link: SamMobile. We remind you that you must have a registered account with SamMobile, otherwise you will not be able to download anything. Registration will take about two minutes.
  • After you download the firmware file, extract everything from the archive into a separate folder and save it to the desktop on your computer.
  • Download Odin3 v3.09 from this link. Extract all the contents and also save them in a separate folder on your computer.
  • Turn off your Galaxy S4.
  • Boot your Galaxy S4 into Download Mode.
  • Launch the Odin program on your computer.
  • Connect your Galaxy S4 to your computer using a USB cable. Wait until Odin recognizes the connected device. If this does not happen, then reinstall the drivers.
  • Next, click on the AP button in Odin and mark the file with the extension .tar.md5 that you received in step 2. This is the firmware file that you need.
  • Make sure all settings in Odin are set to default.
  • Please note that the Re-Partition option is unchecked.
  • Press the START button and wait until the update is installed.
  • After this, your smartphone should reboot and you will see that Android 4.4.2 KitKat has successfully booted on your Galaxy S4 GT-I9500.
  • Disconnect your smartphone from your computer.

If your Galaxy S4 rebooted successfully and the interface works fine and there were no problems during the installation process, then you can close this article. If problems arise and the update installation process has not been completed, we offer some tips below.

Tip 1: If Odin freezes or a FAIL warning appears, then you should repeat all the steps in the instructions from the beginning until you install the update.

  • turn off your smartphone and remove the battery.
  • close Odin and make sure your phone is disconnected from your computer.
  • Boot your smartphone into Download Mode, launch Odin and repeat the instructions again.

Tip 2: If Odin says the flashing process has completed successfully, but the phone cannot boot to the start screen, then you will have to do a “Factory Reset”. This will destroy all data on the system partition, but then you can boot your Galaxy S4 normally.

  • Turn off the phone, remove the battery and make sure it is not connected to the computer.
  • Boot your Galaxy S4 into recovery mode.
  • select “wipe data/factory reset”.
  • return to the main menu of recovery mode and reboot the device – Reboot now.
  • wait until your phone boots up completely and enter your Gmail account details.

Instructions for installing the official single-file firmware on the Samsung Galaxy S4 (GT-I950x).

    Drivers and programs

Attention!

To install the official stock firmware on the Galaxy S4 and return the phone’s status (“Settings” > “About device” > “Properties” > “Device status”) to “Official” after switching from custom firmware and thereby returning the ability to receive updates over the air, just follow the instructions provided.

Installation instructions

    Unpack the downloaded archive into a folder with Odin PC for convenience. The file in the ".tar" or ".tar.md5" format must be left, but the "SS_DL.dll" can be deleted.

    Reset your device.
    To do this, go to the settings tab " Accounts" to the section " Archive and reset", select the item " Reset device" and press the button " Delete everything" The phone will reboot.

    Run Odin PC as administrator.

    Put your device into download mode ( Download Mode).
    To do this, you need to simultaneously hold down the Volume Down key, the Home button and the Power button. Then wait until the phone reboots and agree to the warning by pressing the Volume Up key.

    In this state, connect the smartphone to the computer. In Odin the message “ COM».

    Click on the “ AP» and select the TAR firmware archive.

    Items " Auto Reboot" And " F.Reset Time" must be activated, A " Re-Partition"if active - must be disabled.

    Click on the “ Start" The firmware installation process will begin.

    At the end of the operation, if everything was successful, the message “All threads completed. (succeed 1 / failed 0)". The phone must be restarted manually by holding down the power button until the screen turns off. It may take up to 5 minutes for your device to boot up initially.
    ATTENTION!
    If the device does not boot for a long time or the data has not been reset, it must be performed from recovery.
    To do this, you need to simultaneously hold down the Volume Up key, the Home button and the Power button. After downloading, select " Wipe data/Factory reset", and then - " Reboot system now" If after these steps the device also freezes when loading, you need to reflash it again.

Sooner or later there comes a time when even such a mobile device as the Samsung GT-I9505 Galaxy S4 may become outdated. In such cases, you can improve the performance of your smartphone using firmware.

Why is firmware needed?

Increasing gadget performance– thanks to a software update, you can improve the technical parameters of the phone, improve the quality of pictures from the camera and improve the gadget’s processor;

  • Device troubleshooting– sometimes even the highest quality and most popular models of mobile devices have software flaws. This way you can get rid of errors and other various glitches;
  • Expanding phone functionality– you can significantly improve the functionality of your mobile device.

How to flash GT-I9505?

If you follow all the points listed below in the firmware instructions, then in the very near future your mobile device will significantly increase its functionality.

  1. Charge your smartphone;
  2. Create a directory on your hard drive for downloading files. An important point is that the directory name should not contain Cyrillic characters;
  3. Download all the files necessary for the firmware. It is recommended to disable your antivirus before downloading;
  4. If it is on your personal computer, then it should either be deleted or disabled (to do this, launch the task manager using the number combinations ctrl+alt+del and end all processes marked Kies);
  5. Install the necessary drivers, or rather SAMSUNG USB Driver for Mobile Phones v1.5.29.0.exe;
  6. Extract the files from the archive into the directory you created earlier. To do this, download and unzip Odin3_v3.09 and I9505XXUFNA1 (firmware for Samsung Galaxy S4);
  7. Your next action will be to start your mobile device in Download Mode. To do this, you need to turn off your smartphone. Next, press the combination of the “Power”, “Volume Down” and “Home” keys. Once you see the pop-up, press the Volume Up button. If you saw a green robot on the display of your phone, then you did everything right;
  8. Connect your smartphone to your personal computer;
  9. Launch Odin3 v3.09;
  10. In an open program, you need to go to the PDA. Next, you need to find and select the file I9505XXUFNA1_I9505OXAFNA1_I9505XXUFNA1_HOME.tar.md5. The important point is that the re-partition checkbox should NOT be checked;
  11. Click on the “Start” button;
  12. After installation, you need to start the gadget in recovery mode (this can be done using the “Power”, “Volume Up” and “Home” key combination). Next you need to perform the wipe/factory reset action;
  13. Restart your smartphone.

Conclusion

It should be noted that all files necessary for firmware must be installed on top of the original version of the mobile device software.

Hello everyone, in this post I will show you how you can flash (update the software or reflash), get root rights (rutting or unrooting), install CWM (custom or non-factory recovery) and perform a hard reset on your smartphone Samsung Galaxy S4 GT-I9500 16Gb.

It so happened that I had to use it for a whole week for work. If you compare it with mine, I practically didn’t notice the difference, it’s also dumb in stock, there are also a lot of applications that are useless for me, but there is one thing - the build quality of mine is better.

And so, when updating the software, I will use the usual factory firmware of the latest version with Android 4.4.2 , in this article I will not install custom (modified by other “specialists”) versions of firmware for the reason - well, I don’t like them. I had non-official firmware on my SGS3 for about six months - I didn’t like it. It is clear that people make them “for themselves.” I put the stock one back and rooted it. Everything suits me. I need ROOT rights to remove all applications I don’t need and to install programs that need these privileges. I won't go into detail about this. In the following articles.

In terms of operation, I can only say one thing - the main problem with this phone is the battery - it swelled during this week. This is a factory defect (or rather a miscalculation). When in use, its consumption is 0.7 amperes and therefore, with prolonged use, the first batteries could not withstand such a load. And one more thing that I didn’t like - by the end of the warranty period, if you don’t use a cover, the paint may come off from the rim. In the Chinese this is almost a rarity, but here the device costs a kilobuck at the start of sales. This problem could have been solved. Okay, enough of the rant and let's get started. Everything is in order.

ATTENTION!!! Before starting software updates, rooting, resetting settings and other manipulations with your own or, God forbid, someone else’s device HIGHLY RECOMMEND read this one. In short, you have been warned and don’t say later that this is the first time you’ve heard this.

Preparation for firmware and other actions.

To start flashing your smartphone, you must first prepare. The preparatory stage does not take much time, but it allows you to do everything without any problems. Everything needs preparation.

  • As usual, I first recommend charge the battery , preferably one hundred percent, but half is enough too. But it’s better not to risk it and put the phone on charge and wait for it to finish;
  • For firmware we need a regular microUSB cable , which is included with the device. Check the phone and cable connectors for serviceability and the absence of dirt and traces of oxide. Otherwise, the device simply will not be detected by the computer and will not be flashed;
  • Drivers are installed along with KIES -om or you can install it separately - there are installation instructions and the file itself;
  • Stitcher - Odin3 v3.07 ;
  • Firmware - I9500XXUGNG3 . In the examples I used this version, although an updated version has now been released. But the main thing is not to show you the process of changing software. Latest firmware version I9500XXUHOD4 is in the files - it is relevant at the moment;
  • CF-Auto-Root-ja3g-ja3gxx-gti9500 - file for obtaining root rights;
  • philz_touch_6.00.8-i9500 file for installing custom recovery;
  • Personal computer or laptop - a simple computer with winXPwin7win8 on board will do;
  • You've probably already thought about where to get all this software - at the end of the post you will find the answer to this question.

Samsung Galaxy S4 GT-I9500 - drivers.

There are several ways to install drivers for Samsung devices. I use only two - the first is to install a synchronization program with a computer called KIES. You can download it on the official SAMSUNG website completely free of charge and it is always the latest version. Look for it on the model page in the technical section. support. I told you how to install it. If you already have it installed, then you can skip this part of the post and go straight to the firmware. If not, it is better to install the drivers separately. Now I will show you how to do this.

Step 1:Download and run the file named SAMSUNG_USB_Driver_for_Mobile_Phones.

Step 2:The installer will launch. Click the NEXT button.

Step 3:Select your country and language, and then click NEXT.

Step 4:Select a disk location for installation or leave everything as is and click the INSTALL button.

Step 5:The process of copying files and installing drivers.

Step 6:The installation is complete, click the DONE button to exit the installer. Now you need to connect the turned on smartphone to the computer with a cable and wait for the system to automatically detect it.

Standard software update.

This part will show how to flash this device with standard or factory software. This method is absolutely legal and safe for both the warranty and the hardware of your smartphone. It is also very simple and you will cope with this task the first time... I am sure of it. But before you start doing anything SAVE ALL IMPORTANT AND NECESSARY INFORMATION FROM YOUR PHONE TO A MEMORY CARD OR OTHER INFORMATION CARRIER, OTHERWISE YOU WILL LOSE EVERYTHING, AS IT ALL WILL BE DELETED. Let's get started.

Step 1:Before flashing the firmware, you must enter the phone into DOWNLOADING mode. This is done like this - press the volume button down (decrease sound) and without releasing it, press the HOME button (at the bottom on the front part there is one there) and immediately the power button, hold them down until the WARNING!! warning appears. Here we are warned about the risks of flashing firmware. If this doesn’t scare you, press the volume up button to continue. If you still change your mind about continuing, press the volume down button (volume down) and the phone will reboot. But I hope that you are not one of the timid ones, so let’s continue.

Step 2:If a green android appears, then you did everything right. This is download mode.

Step 3:Now you need to run the flash driver. Go to the Odin folder and run the Odin3 v3.07.exe application.

Step 4:This is what it looks like when it's running.

PIT -JA3G_EUR_OPEN.pit

Bootloader- BL_I9500XXUGNG3_2200416_REV00_user_low_ship.tar.md5

PDA- AP_I9500XXUGNG3_2200416_REV00_user_low_ship.tar.md5

PHONE- CP_I9500XXUGNF6_2068929_REV00_user_low_ship.tar.md5

C.S.C.- CSC_SER_I9500SERGNG3_2200416_REV00_user_low_ship.tar.md5

BE CAREFUL - CHECK SEVERAL TIMES!!!

Step 6:Now you need to connect your phone to your computer. BUT if you have KIES installed, then you need to close it and “kill” all processes in the task manager with a name that contains the word KIES. This is a must do. Now connect the device. If the com port is detected, press the START button in Odin.

Step 7:The process of copying firmware files has started.

Step 8:Wait until the phone reboots.

Step 9:Everything Samsung Galaxy S4 GT-I9500 is flashed. You can use it.

Root rights in 3 minutes

Let's now show you how you can get superuser rights or root access. BUT THERE IS ONE MINUS - YOU AUTOMATICALLY LOSE THE OFFICIAL WARRANTY FOR YOUR SMARTPHONE. AND THAT'S WHY I DO NOT RECOMMEND YOU TO DO THIS.

Step 1:We enter the device into download mode. I showed how to do this above. Let's launch ODIN.

Step 2:Press the PDA button and select the file CF-Auto-Root-ja3g-ja3gxx-gti9500. We connect the device to the computer. We wait for it to be determined and press the Start button.

Step 3:The files will download quickly. The phone will reboot and the message PASS will appear! - root received.

Step 4:Go to the main menu of your phone and the SuperSU application icon should appear there.

Step 5:I WILL REPEAT AGAIN. After rooting, go to Downloading mode and you will see that the custom firmware counter has triggered. This means that if you contact the ASC under the manufacturer’s warranty with some kind of malfunction, you will carry out repairs at your own expense. Since you blew the guarantee in 3 minutes. This is spelled out in the gar. coupon. We have not yet learned how to reset this counter in a more or less simple way.

ClockWorkMod recovery (CWM)

CWM is a custom recovery that has much greater functionality compared to the standard one. Installation of recovery will be shown here philz touch for our smartphone. When you install this recovery, you also lose the WARRANTY.

Step 1:Boot your smartphone into download mode. Launch one. Select the file philz_touch_6.00.8-i9500 by pressing the PDA button, connect the body to the computer, after identifying the com port, press the Start button and wait for PASS!. CWM is installed.

Step 2:This is what CWM philz touch 6.00.8 looks like for SGS4.

Video: resetting the pattern key.

If you have forgotten the pattern combination or just want to do a HARD RESET on your smartphone, watch this video. It shows everything in detail.

Samsung Galaxy S4 GT-I9500 “SECRETS” of development.

So YOU ​​learned how to flash Samsung Galaxy S4 GT-I9500.

P.S. If you encounter any errors during the firmware process or the device does not want to be detected by the computer at all, read this. It describes typical problems and errors that novice users often encounter.

Share: