How to connect the Internet connection on a computer via cable? Setting up an Internet connection in Windows XP Connecting to the Internet via a Windows 7 cable.

Today we’ll look at how to set up a home local network on devices running the Windows 7 operating system. A home local network is an association of several devices, usually computers, laptops and printers, for the purpose of seamless data exchange, organizing a gaming area, and obtaining shared access to the Internet and shared devices (printers). Creating a home network in recent years has been an integral part of spending time on the Internet for users who have more than one device that allows them to use the computer web (laptop, smartphone, computer, TV). Such procedures are easy to perform, even if the person is not a computer hardware specialist.

Types of home networks

Depending on the interface used to create a local network, they are divided into wireless and wired.

Wired network

When formatting a wired home network, a cable is used as a data transfer interface without any intermediaries - computers are connected with a twisted pair cable. Due to the many disadvantages and limitations of such a local network (the inability to organize shared access to the Internet without an additional network card, only two devices can be connected), this method of forming a connection is practically not used.

More common is to use a switch (switch) as an intermediary. The advantage of a local network is the ability to connect more than two computers and organize shared access to network devices and the global web. But settings and specifying IP addresses in Windows 7 are done manually, which is not very convenient, especially if you have a significant number of devices.

Wireless network

The most popular method of forming a home network is to use a router as a connecting device. The advantage over other options is support for wireless data transfer interfaces (via radio, support for a significant number of computers, ease of setup).

Configuration process

First of all, it is necessary to connect two or more devices, for example, using a twisted pair network cable (we will consider the configuration of a local network using this example).

Go to the local home web settings on all Windows computers. This is done through the “Control Panel” or the “Start” search bar.
Open the “Control Panel” and call the option responsible for configuring the network connection, as in the screenshot.

Enter “center” into the Start search bar and select the same option in the search result.

After this, the window shown below will be displayed.

To configure your home network, click on “Change adapter settings” located in the left frame of the window that opens.

Double-click on the required connection (often it is the only one and is marked as unidentified).
In the “Connection Status…” dialog that opens, click on the “Properties” button to configure the network connection.

Double-click on the protocol (TCP/IPv4) or select the name of the item and click “Properties” to begin manually setting up the network connection.

We set the first trigger switch to “Use the following IP”.
Enter the computer's IP address and subnet mask, as in the screenshot.

We leave the remaining fields untouched, since they are not needed for connection during the formation of a home local network, and click “OK”.
For the first time, you will have to specify the type of network location, which determines the firewall and connection security settings recommended by Windows 7 by default.

In total, Microsoft offers three types of network placement:

Home network - used to create a local network that includes devices you know and can trust. For such a connection, the network discovery function is activated, which allows you to see other devices, connect to them and use files that are open for general use with the specified privileges.

Working - suitable for a small office, office, computer class or club. As with HomeGroup, discovery and file and device sharing are active between Windows computers.

Public – used in public places. The settings of such a web hide the computers connected to it in order to increase security and reduce the likelihood of becoming a victim of hackers.

We check whether all devices are members of the home network and have different names and IP addresses.
Computer names are checked and, if necessary, changed by going to the Windows configuration menu. Call the “My Computer” context menu and select “Properties” or click on the “System” item located in the “Control Panel”.
In the “Computer” field we check the names, below, in the “Workgroup”, we look at whether they belong to the same local network. Remember that the names of devices running Windows 7 do not have to be the same, but they must be connected to the same network.

If you need to change the PC name, click on “Change settings”.

As you can see, creating a new connection between computers is a simple process, and you can completely do without a wizard.

Checking the functionality of the created web

The activity and functionality of a network connection in Windows is tested by entering a single short command from the command line.

We launch it, as before, by entering “cmd” in the search bar.

Enter the ping command with parameters in the form of the IP address of the other device: “ping168.0.1”.

With the correct settings, you will see the delay time and the number of packets sent equal to 4 without loss.

(Visited 34,031 times, 9 visits today)

Setting up the Internet in Windows XP is not particularly difficult. This applies to both wired and wireless connections. In the first case, the parameters are set in the section "Network connections", which is located in the Control Panel. In the second, everything is done with loading drivers if they are not initially in the system.

Connection setup

If the setup is for a wired connection, then you need to know certain network parameters. But this does not apply to the case when the computer is connected to a Wi-Fi router via a cable. Regarding the wireless network, things are different.

If the laptop has pre-installed Wi-Fi, then you just need to download the necessary drivers and connect to your home network. The procedure for a discrete adapter is similar. It's even easier for owners of 3G/4G modems: just download the necessary software, enter the SIM card PIN if required, and activate the connection.

Method 1: Direct Wired Connection

Open menu "Start" and click on "Control Panel". There, switch to the classic display view, if such an option is available. Expand the element "Network connections".

Several devices can be displayed in the window. Find the one whose status is signed "Connected", and double-click on it. There select the item with the name "Internet Protocol"TCP/IP" and open its properties. Check the checkboxes for manual input mode, and then specify your network settings. Button "OK" will be confirmation of your actions.

Note: the Internet may not work even with the correct parameters. This is because your connection is configured to a network device with a differentMAC address. In this case, you need to call the provider and describe the problem, technical support will fix everything within a few minutes.

Method 2: Wired connection via Wi-Fi router

Now let’s figure out how to connect the Internet with a cable via a router on Windows XP. In this case, no detailed configuration is required, since the device parameters are already set as required. All that remains is to connect it to your computer or laptop using an Ethernet cable.

Important: initially two cables are suitable for the router: one for power, the second for the Internet. There is no need to touch them. Connect the third one to one of the free numbered sockets, and then insert it into the network adapter on the computer.

When the physical connection is completed, all that remains is to configure the computer for correct operation. Most likely, even this will not be required; the Internet will start working immediately. If this does not happen, then follow these steps:

Close the settings window and go to any program that works with the Internet, for example, a browser. There you can check the connection status. If the instructions did not give any results, then there is a problem with the router settings.

Method 3: Wireless Network

Setting up Wi-Fi in Windows 7, as well as an external modem, differs from a wired connection. First you need to find and install drivers for the device. They are usually included in the package and are also available for download from the official website. The shortcut to enable 3G/4G is located on the desktop. Open it and then press the connect button.

The connected Wi-Fi will be displayed in the tray. Click on its icon, select your home network and enter the access code for it.

How to set up internet on windows 7

Today, the Windows 7 operating system is used by more and more users. Compared to Windows XP, the seven is not much different and, in principle, if you know XP well, you can work in the new Windows 7 without any problems. But still, despite the fact that this OS is very similar to Windows XP, there are still some differences in it. In today's article we will look at setting up an Internet connection in Windows 7 and using an example with screenshots we will learn how to set up the Internet on this system.

Instructions for setting up the Internet in the Windows 7 operating system

Before you start setting up an Internet connection, you need to install drivers for your modem, network card or other device with which you access the Internet. And only after the drivers for the necessary equipment have been installed, you can proceed directly to setting up an Internet connection. First you need to launch the Control Panel, to do this you need to click the Start button and select Control Panel:

You will see the Computer Settings window, in which you need to switch the view by category:

After that, in the list that appears, select “Network and Sharing Center”:

In the “Network and Sharing Center” you need to select the “Set up a new connection or network” item:

At the next stage of installation you need to be careful! Here the operating system prompts us to select an Internet connection option. If you are using an ADSL connection, then you need to select the first item: “Connect to the Internet.” If you use, for example, 3G Internet, then you need to select the item “Setting up a telephone connection.” Select the option you need and click “Next.” I chose the first option:

In the next window we just need to click on “High-speed (with PPPoE)” (If you are setting up 3G Internet, then at this stage you will see a modem selection window):

After this, you need to enter information from your Internet service provider. Here we write the username and password. If you are setting up 3G Internet, then you will have another additional field “Dialed number”. After the data has been entered, click the connect button:

If everything is configured correctly, you will see the message: “The Internet connection is ready to use”:

The next step internet settings on windows 7 will create a connection shortcut on the desktop. To do this, again go to the control panel -> Network and Sharing Center and click on the item “Change adapter settings”:

In the window that appears, right-click on the created connection and select “Create shortcut”:

Now click on the “Yes” button, thereby confirming the placement of the shortcut on the desktop:

How to change network card settings in Windows 7

As you all know, an Internet cable today is most often connected to a network card. The fact is that sometimes in order to properly configure the connection, it is necessary not only to install drivers but also to correctly configure the network card itself. To do this, you need to click on the “Change adapter settings” item in the “Network and Sharing Center” and in the window that opens, find “Local Area Connection.” On this connection, right-click to open the menu and select “Properties”, you have The following window will open:

Here you need to highlight Internet Protocol version 4 (TCP/IPv4) and click the properties button. A window will open in which you can enter the IP address, subnet mask, default gateway and other settings.

Possible problems when setting up the Internet on the Windows 7 operating system

If you did everything correctly but for some reason the Internet does not work on Windows 7, then you should check the following:

Hardware drivers. Once again, you need to check that the installed hardware drivers are correct.
Firewall settings (often included with antivirus programs). The fact is that when you create a new Internet connection, the firewall installed on your computer recognizes it as a new network and can block it. Therefore, you need to check your firewall settings and change them if necessary.
It is also a good idea to check your computer for viruses. The most effective way would be to check your PC using 2-3 of the most popular anti-virus programs.
If none of the above points gave a positive result, then you can repeat all the Internet setup steps again.
Check the functionality of the equipment (modem, network card) on another computer or another operating system.
You can study the article on how to set up the Internet on Windows XP. This article is located

Any user, having purchased a laptop or desktop PC, first of all asks the question of how to set up the Internet on a computer. Below is a detailed guide describing all the steps on how you can set up Internet access in various operating systems.

The essence of the procedure

Sometimes automatic settings do not work, and you need to configure the connection manually. The main requirements are concluding an agreement with a communications service provider for access to the global network and using suitable equipment (the PC must be equipped with a network card, and the user must purchase a modem if the provider has not provided one, etc.).

The instructions below will address the question of how to properly connect via cable, since to connect via wireless technology, usually nothing else is required other than entering a login and password, and users do not experience any difficulties, of course, if the WiFi router is already fully configured.

Setting up an Internet connection

In the vast majority of cases, users' computers run Windows, and all operating systems from Microsoft differ in that the Internet is configured using the TCP/IP protocol system.

To put it simply, we can say that this system serves as a kind of bridge between all PCs connected to the network with certain authentication and information transfer, separated at the first stage of the route and connected at the last.

The main equipment in the computer responsible for the process is the network card.

As can be seen from the above figure, it has a special connector for installing a cable. Before setting up the Internet, you should definitely find out the characteristics of the card. It determines the data transfer speed for the user’s computer. If it has speeds lower than those provided by the provider, then there is no hope for the parameters specified in the contract with the communication service provider.

To find out the equipment data, you need to take several steps:

Launch “Control Panel”;
Go to the “Device Manager” tab;
Call the context menu from the network card;
Click the line “Properties”;
All parameters will be displayed in the “General” tab.

Using automatic mode

It is necessary to carry out the following actions (using Windows 7 as an example):

Insert the network cable (Internet source) into the network card socket;
Through the “Control Panel”, launch the “Network and Sharing Center”;
Click “Set up a new connection or network”;
Next, go to the “Internet Connection” tab;
Complete all steps displayed by the “Connection Wizard”;
Restart PC;
Ready. Now access to the Internet from the computer is already fully established.

Manually

You need to follow the steps of the previous instructions and then enter information from the provider manually, you just need to first uncheck the automatic settings items, otherwise the fields for entering parameters will not be active.

The following parameters are typically used:

Specify “192.168.0.1” as the IP;
Mask: "255.255.255.0";
Main gateway and DNS: "192.168.1.1".

For Windows XP

The algorithm of actions consists of the following steps:

Through the “Control Panel”, enter “Network Connections”;
Then go to the “Properties” tab;
Select “Configuring the TCP/IP protocol”, for which specify the appropriate method from the proposed methods for assigning addresses through the “Properties” tab.

Windows 7

A completely similar procedure, just some parameters under a different name. The protocol must be selected TCP/IPv4.

Sequence of steps:

Control Panel;
Network and Sharing Center;
Setting up a new connection or network;
Specify the required type of connection. Data can be corrected by following the chain: “Network connection”, then open “Properties”, go to the “Network” section and select “Protocol version 4”.