Garmin map update program. How do I update maps on my Garmin navigator? MapUpdater Instructions

It's no secret to drivers and travelers that roads in cities and countries often change. Without timely updating of software maps, the navigator can lead you to a dead end, causing you to lose time, resources and nerves. Owners of Garmin navigators are offered two ways to update, and we will look at both of them below.

Uploading new maps into the navigator's memory is a fairly simple procedure that should be performed more often, at least once every six months, and ideally every month. Keep in mind that global maps are quite large in size, so the download speed directly depends on your Internet bandwidth. In addition, the internal memory of the device may not always be enough. When going on a trip, purchase an SD card where you can download a file with terrain of any size.

To complete the process itself you will need:

  • Garmin navigator or memory card from it;
  • Computer with Internet connection;
  • USB cable or card reader.

Method 1: Official app

This is a completely safe and easy way to update your cards. However, this is not a free procedure, and you will have to pay for the provision of fully functional, up-to-date maps and the ability to contact technical support.

I would like to note that there are 2 types of purchase: lifetime membership to Garmin and one-time fee. In the first case, you receive constant free updates, and in the second, you simply purchase one update, and each subsequent one will need to be purchased in exactly the same way. Naturally, to update the card, you must first install it.

  1. Go to the manufacturer’s official website to install the program, through which further actions will take place. You can use the link above for this.
  2. Download Garmin Express. On the main page, select the option "Download for Windows" or "Download for Mac", depending on your computer's OS.

  3. Once the distribution has downloaded, open it and install the application. You must first accept the user agreements.

  4. We are waiting for the installation process to complete.

  5. Let's launch the application.

  6. On the start window, click "Beginning of work".

  7. In the new application window, select the option "Add device".

  8. Connect your navigator or memory card to your PC.

  9. The first time you connect your navigator, you will need to register it. Once GPS is detected, press "Add device".

  10. The update check will begin, wait until it finishes.

  11. Along with updating your maps, you may be prompted to upgrade to a new version of the software. We recommend clicking "Install all".

  12. Before starting installation, please read the important rules.

  13. The first step will be to install the software for the navigator.

    Then the same thing will happen with the card. However, if there is not enough space on the internal memory of the device, you will be prompted to connect a memory card.

  14. Once connected, the installation will be prompted to resume.

    Wait for it to complete.

As soon as Garmin Express notifies you that there are no new files to install, remove your GPS or SD storage device. At this point the process is considered completed.

Method 2: Third Party Sources

Using unofficial resources, you can import custom and custom street maps for free. It should be noted that this option does not guarantee 100% safety, correct functioning and relevance - everything is built mostly on enthusiasm and once the card you choose may turn out to be outdated and no longer developed. In addition, technical support does not deal with such files, so you will only have to contact the creator, but it is unlikely that you will be able to wait for any response from him. One of the popular services is OpenStreetMap, using its example we will consider the whole process.

To fully understand, you will need knowledge of English, because... all information on OpenStreetMap is presented there.


OSM has a separate dedicated server provided by the domestic distributor Garmin for storing maps with CIS countries. The principle of their installation is similar to that described above.

Using the file, you will find the name of the archive with the desired country of the former USSR or Russian federal district, and then download and install it.

1. Download the required update using the MapChecker program.

2. Then you need to connect your Garmin car navigator or memory card with the previous version to your computer and run the downloaded file. The program will provide further instructions.

Transferring cartography from the navigator's memory to an SD (microSD) card

Some nuvi GPS navigators have a small amount of built-in memory. Updates may simply not fit into the device’s memory. You will need to download maps for núvi onto a blank SD or microSD card of suitable size. This is a simple procedure, but we will still describe in as much detail as possible what needs to be done to ensure that your car navigator stores maps on SD.

1. Buy a blank SD or microSD flash card in any computer store or mobile phone store. If you do not know which card is used in your GPS receiver, then simply show the device to the seller. The recommended memory card size is 2 GB. You will have a memory reserve for further updates, and larger maps may not be correctly perceived by some models of car navigators.

2. Place a blank flash card into the navigator and connect it to the computer with a USB cable. The computer will detect the GPS receiver as two removable disks - the memory of the device itself and an SD (microSD) card. Through “My Computer” or “Explorer”, open the memory of the garmin navigator (the flash card is still empty). Back up the Garmin folder to your computer's hard drive.

If you have a nuvi 1200, nuvi 1300, nuvi 1410 and older series navigator, the cartography is stored in a hidden folder .System. You need to make a backup copy of this exact folder.

3. Open the flash card and create a Garmin folder on it. From the Garmin folder in the navigator's memory, cut out the GPS map file for nuvi gmapprom.img and paste it into the Garmin flash card folder. Rename the transferred file to gmapsupp.img.

4. Now you need to check if everything was done correctly. Disconnect the nuvi GPS navigator from your computer and wait for it to load. The navigator should show you a map located on SD (microSD), that is, simply display the map on the screen.

5. Your GPS map is loaded onto SD (microSD), so simply update the “flash drive” using the MapUpdater program according to the instructions at the beginning of the article.

If you made a mistake somewhere, you can restore everything by returning the backup copy of the Garmin folder to the navigator’s memory.

If any difficulties arise, simply contact a service center, for example, our store.

MapUpdater Instructions

Many can no longer imagine life in a car without vehicles that “think” and navigate the terrain instead of the driver. However, when purchasing the next miracle of computer art, you need to remember that simply by hanging the navigator on the windshield, you cannot expect uninterrupted and correct operation from it. Every day new roads, streets, signs appear, and there is a risk of easily getting lost in any area.Timely updating of the device software will allow you to easily explore unknown spaces.

Software: how to update your garmin navigator correctly?

In order for the GPS navigator to work flawlessly and perform its functions, a group of software solutions is needed. Such devices operate on the basis of a stable Linux OS, which significantly distinguishes them from all other Windows-based guides. The device firmware itself And loadable modules(individual functions, voice files, language, etc.) are two separate pieces of software.

When updating the firmware, please note that in some models this may lead to the loss of some languages.
  1. GPSMAP
  2. GPS 72/76
  3. Nuvi 3xx and 6xx
  4. Zumo 550
  5. GPS 60
  6. Summit
  7. Legend

This is an incomplete list of models, for updates of which it is better to contact professionals.

We do everything in order

All navigation devices are equipped with maps and an installed program. If the software is licensed, then you can download the map from the manufacturer’s website. Typically this is GisRX, Navitel, iGO Primo, CityGID, etc.

So, how to update garmin navigator? To begin with, you need to arm yourself with a PC, a cable to connect to it and up to 30 MG of memory on the device. You can simply check the capacity by clicking in the section "My Computer" to the Garmin folder. If there is no space, you can mercilessly delete other files (language files, help, etc.). The next step will be updating the drivers. Usually there is no problem with this.

Installing the program for updating

For example, let's use the program WebUpdater. It can be quickly downloaded for any computer operating system. Next we follow these steps:

  1. Through “Start”, go to the “All Programs” section, find WebUpdater and in the window that appears, click “Next”. At this time, the program will detect the presence and connection of a new device.
  2. After clicking the “Next” button, the program will immediately provide information about the availability and version of the navigator software, and will also offer information about the innovations introduced. If the device firmware is new and does not require updating, you should take the next step
  3. Loading modules (language, help, sound, etc.). The required functions are checked, click “Next”
  4. After successful loading, the “Done” button appears – click
  5. Disconnect the device from the PC, then turn it on and wait until the modules are completely unpacked

Updating your device without pairing it with a PC

The question often arises about how to update a garmin navigator if the device does not connect to the computer. After downloading the drivers, just follow the program's instructions. After the message about turning on the navigator (Turn on your Garmin GPS), you need to turn on and connect the device to the PC. The software will be installed automatically. To complete, click “Done”.

Possible problems during update

  • Turning off the device during firmware. The battery may have run out. To prevent this from happening, you should fully charge your device before installing updates.
  • "System Software Missing" message. The reason may be incorrect operation of the antivirus, which prohibited the launch of individual files. You must contact the warranty center.
  • “Loading Maps” message after several reboots of the navigator. The problem may occur due to incorrect firmware and installation of unlicensed cards. You should contact service centers to obtain recovery files.

By following this guide, you can easily update the navigator of many models yourself, conquer new terrain and always keep the car on the correct course.

1410 is a universal device for searching and modeling a route according to specified parameters while the vehicle is moving. A wide color touch screen with a resolution of 480 x 272 pixels allows the user to view maps, images and photos. Screen diagonal – 5 inches. Display type – WQ VGA TFT with white backlight. The compact dimensions of the device - 13.7x8.6x1.7 cm - make it possible to use the Garmin Nuvi 1410 GPS navigator in almost any conditions. The weight of the device with a built-in slot for an SD card and a rechargeable battery (Li-Ion) is 221 g. The device operates from a car cigarette lighter.

The device is equipped with navigation and route planning functions. The most common functions: plotting and remaking a route, photo navigation, sorting points of interest (POI), speed indicator. Using the Nuvi 1410 GPS device, the driver receives information about traffic jams, weather, and can also contact other users of similar devices. To do this, you additionally need to purchase an FM antenna.

The function of updating the route taking into account fuel consumption (ecoRoute) is popular among drivers. The “Where am I” function allows you to determine the location of an object and its location on a GPS map. When driving, it is convenient to use the voice guidance functions. The Garmin 1410 navigator interface supports all functions and device settings in Russian. The built-in Bluetooth option with Hands-free function allows the user of the device to talk on the phone without stopping while driving.

The device also has a headphone jack and can view images (JPEG format, etc.). Additional voice features and icon graphics can be downloaded using Garmin Garage content.

Maps for the Garmin Nuvi 1410 navigator are presented in two formats: topographic and landscape (automotive). It is more convenient for the driver to use car maps, since their content is “linked” to the road. They display information about hotels, parking lots, car services, gas stations, food outlets and other important objects. Topographic maps are focused on tourist routes (indicating campuses, recreational areas, etc.). The Nuvi 1410 navigator comes with built-in maps (“Roads of Russia”, CIS countries, Europe, North America).

You can update maps on the sales dealer’s website or use special programs (for example, MapChecker, Map Updater, etc.). To independently update firmware (software), it is recommended to use software from Garmin - the WebUpdater program. DeLuxe firmware will also work. However, to install it, you need to reset all previous settings on the navigator. The Garmin Nuvi 1410 GPS navigator kit includes a USB cable and a bracket with a suction cup for mounting on a car windshield. The battery life of the device is up to 4 hours.

How do I update maps on my Garmin navigator? The number of motorists who use car navigators increases more and more. Among them, Garmin navigators are very popular. Technologies are moving forward, device software is updated daily, and maps are no exception. Users often ask the question: how to update maps on the GARMIN navigator so that they are up to date?

Be sure to check that your navigator is fully charged and is on the list of devices for which the latest updates have been released and follow the instructions below.

Before you do, you need to download the program from
to update the Garmin Web Updater navigator and install it on your personal computer (). There are versions for various operating systems.


Next, connect the navigator to the computer via a USB cable and run the update program and follow the wizard’s prompts. Click next and identify our device, select it, the program will determine the speed of your connection and estimate approximately the time it takes to update. Agree to the update rules and run it.


After the update, the program will check the device and offer additional updates to individual components, which you can do by checking them.


If you don’t want to update anything additionally, just click next and you’re done. Your software and maps are now the latest version, enjoy your travels.

You can download new maps either from an official source (this will cost some money) or for free. The article will discuss both methods. Which one is more profitable is up to the user to decide. Let's start with how to update the maps on the Garmin Nuvi 50 navigator.
Official source

Downloading maps from an official source ensures that the navigator is protected from the installation of third-party programs that can harm the device. This is the safest way. So, how do you update the map on your Garmin navigator? To begin with, the update files must be purchased. You can buy a one-time update, or pay for continuous map updates for the entire life of the device. You can also purchase only maps of those areas that have already been installed in the navigator.

Next, you need to connect the device using a USB cable (it should be included). Create your account on the official website and log in. You need to go to the “My cards” section, it will open a list of all available cards. You can also purchase other area maps from the official website (for example, the North America map will cost $70). Select “Recently purchased maps” in the menu, find your navigator model in the list of devices. Next, you need to install Garmin Communicator to synchronize with the program on your computer.

It is worth noting that it is impossible to install the program if you use Google Chrome. Please use a different browser. You will then be prompted to install Garmin Express. If this does not happen, you need to download it and install it. This utility interacts directly with the navigator. Complete a simple registration in the installed program. In Garmin Express, select the Update tab. There you can see all the updates available for the device. By clicking on the “Details” button, you can install the update. The updates will begin downloading.

Once the download is complete, you need to restart the device and unplug the USB cable from the computer. This completes the update of maps from the official source. As you can see, this is not difficult at all. Next, let's look at how to update maps on the Garmin Nuvi 1410 navigator. The difference in models will not affect the described process in any way. Downloading from a third-party source Before downloading maps from an unofficial source, you should be aware that the manufacturer is not responsible for software that is not installed from the official site.

If the navigator suddenly breaks down, it will no longer be accepted under warranty. Therefore, all downloaded files must be carefully scanned with antivirus programs. It is better to use sites with open maps. These are free files available to everyone. They can be easily imported to your device. On such sites you can find maps of various areas. Select the required area and download it to your computer.

Connect the navigator to your computer using the USB cable included in the kit. If Garmin Express opens automatically, close the program; it will interfere with the installation of maps. After connecting, the GPS navigator should start working in disk drive mode. If this does not happen, switch it to this mode automatically in the gadget settings. Enter the navigator's file system. Enter the map folder.

If it doesn't exist, create it. Copy the file downloaded from the free maps website to the map folder (after checking the file for viruses). When the download is complete, restart your navigator. After this, you need to turn on the navigator, select the downloaded map in the settings, changing it to the old one